Aqua Blasting

The Aqua Blasting Process

The aqua blast process simultaneously degreases and blasts many sizes of components using a non-aggressive process with glass media.

The water/media slurry is contained within the cabinet sump, delivery of the slurry to the manual blast nozzle is via a glandless polyurethane pump and associated hoses located inside the machine.

Compressed air is added at the blast nozzle to accelerate the slurry and provide the cleaning effect.

The process cleans by flow not by impact producing a 'soft' finish with the water acting as a lubricant which avoids media impregnation. The component is then blown dry with dry compressed air paying particular attention to oil ways, in engine casings, and channels in carburettors.

Aqua blasting is ideal for giving the best finish on the majority of motorcycle and car parts.

Best results are achieved on crankcases, barrels, cylinder heads, carburettors, wheel hubs, rocker covers and more.